manualshive.com logo in svg

Teac CD-W516EB, User Manual, Page: 21 / 42

Share
Download
Teac CD-W516EB User Manual Download Page 21

Connecting to Audio Equipment

TEAC CD-RW Drive User’s Manual

13

Connecting to Audio Equipment

The CD-RW Drive outputs line-level audio signals from the headphone jack on 
the front panel. You can connect headphones or external powered speakers here. 
The headphone jack accepts a 3.5 mm stereo mini-plug. For external powered 
speakers, connect a stereo adapter to split the output into separate leads for the left 
and right channels. Such adapters convert a male stereo mini-jack to two female 
phono jacks.

Alternatively, if you are using a sound card in your PC, you can connect external 
powered speakers to the audio connectors on the rear panel of the PC. 

Figure 10. Connecting Analog Audio Speakers or Headphones

Note:

 If you connect external powered speakers to the sound card (on the rear 

panel of the PC), monitoring sound via headphones connected to the headphone 
jack on the front panel will be disabled. In this case, connect the headphones to 
the speaker.

Or connect speakers
or headphones to
front jack of the

powered speakers

3.5mm stereo 

Connect speakers
to sound card

A.

B.

CD-RW Drive

mini-plug

TEAC16x10x40.book  Page 13  Thursday, March 15, 2001  11:15 AM

Summary of Contents for CD-W516EB











































Reviews:

No comments