33
ENGLISH
To reset your unit to the factory default
If your unit is not working properly, it might help to reset it to the
factory default.
This will clear your network settings (including pass keys) and
other user settings (preset stations etc.).
1. If the unit is on, press the STANDBY/ON button on the remote
control unit turn the unit on standby.
2. Hold down the VOLUME/SET knob until the unit turns on.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or
use diluted neutral cleaning liquid. Be sure to remove any fluid
completely. Do not use thinner, benzine or alcohol as they may
damage the surface of the unit.
Internet radio
Cannot connect to the Internet.
e
Connect the wireless LAN antenna properly to the unit.
e
Check if your computer can connect to the Internet using the
same network.
e
Enter a correct passkey to the network.
e
Check the settings of your network’s firewall. The unit needs
access to the following UDP and TCP ports as a minimum: 80,
554, 1755, 5000 and 7070.
Cannot listen to a station/Podcast.
e
The broadcaster has a temporary trouble with Internet
connection.
e
Check if your Internet connection is not temporarily
disconnected or disturbed.
Cannot find a station/Podcast in the station list.
e
The station/Podcast may not be broadcast at the moment.
e
Add the station/Podcast to your own station list by accessing
the Internet radio portal.
Summary of Contents for AG-H600NT
Page 99: ......
