15
Listening to a cassette tape
This unit can play normal (type I), chrome (type II) and metal (type IV)
tapes .
1
Press the POWER button to turn the unit on.
2
Press the EJECT (
-
) button to open the cas-
sette compartment.
3
Load a cassette tape into the compartment.
Insert the cassette tape with the playback side facing forward
and its open edge facing down . Then, close the cassette com-
partment by pushing it gently . Use caution, because forcing it
shut could cause malfunction .
ATTENTION
o
Confirm that the tape is not slack (page 8) .
o
Do not use deformed or slack tapes because they could
cause malfunction . Do not force the door of the compart-
ment by hand when opening it .
4
Press the play (
y
) button to start playback.
ATTENTION
Never turn the power off or disconnect the power cord during
playback. Doing so could cause the tape to become stuck, for
example.
Notes about playing (recording) a tape in one deck when
tapes are loaded in both cassette holders
If the play (
y
) button is pressed for the tape that is not playing
(recording)
e
When the PLAY MODE switch is set to NORMAL (page 29),
the tape that is playing (recording) will stop, and the tape for
which the play (
y
) button was pressed will start playback .
(Pressing the play button prioritizes that tape .)
e
When the PLAY MODE switch is set to SPECIAL (page 29),
the tape that is playing (recording) will continue, and the tape
for which the play (
y
) button was pressed will start monitor-
ing playback .
If the record (
0
) button is pressed for the tape that is not playing
(recording)
e
The tape that is playing (recording) will stop, and the tape for
which the record (
0
) button was pressed will enter recording
standby .
If a rewind/fast-forward (
m
/
,
) button is pressed for the tape
that is not playing (recording)
e
The tape that is playing (recording) continues as is, and the
tape for which the search rewind/fast-forward (
m
/
,
)
button was pressed will rewind/fast-forward .
