5
English when click “English” at the bottom of Login screen
Enter your user name and password, then click “Login” button, the Active will installed
automatically
；
(Default user name
：
admin
；
Password
：
123456)
Select different scream at bottom right of screen to adjust high or low resolution monitor
；
Change IP address and WEB port
：
When camera IP address segment is different from computer, Change camera IP usually,
First connect the camera to an computer, of which IP address was set as same network
segment as 192.168.0, Then enter into camera operation screen through IE browser, click
“
network setup
”
→“
Ethernet Setup
”
in the left menu bar. If there are many IP cameras in
one net, Every camera IP address should be set to be different
In the network transmission, port 80 will often be reserved or shielded by network operators,
you can change the port to 81 or 800 and others except 80 according to the following steps:
click
“
network setup
”
→“
Stream Setup”
→
change Web Access Port, Once the port 80 is
changed, you have to enter IP address http:// manually and add :port number in the end of
address when using IE browser, eg:
http://192.168.0.123:81
