409-32043
Rev. D
5
of 11
INTRODUCTION
Micro SDE Lithium-Ion Battery-Powered Crimping Tool Kits 2280380-[ ] each consist of a battery crimping tool
and one rechargeable battery (2280381-1) used to power the tool. (See Figure 1.)
Kit 2280380-1 includes a 110V battery charger (2280382-1).
Kit 2280380-2 includes a 220V battery charger (2280382-2).
This powered crimp tool is designed to accept interchangeable SDE die assemblies for crimping various types
of closed and open barrel terminals.
When reading this manual, pay particular attention to DANGER, CAUTION, and NOTE statements.
DANGER
Denotes an imminent hazard that may result in moderate or severe injury.
CAUTION
Denotes a condition that may result in product or equipment damage.
NOTE
Highlights special or important information.
Each kit is designed to accept interchangeable die assemblies used in PRO-CRIMPER
™
hand tools, which
crimp various types of terminals. See Table 2 for a list of popular die sets for crimping open and closed barrel
terminals. For a complete list of the die sets, refer to data sheet
NOTE
Dimensions in this customer manual are in metric units [with U.S. customary units in brackets]. Figures and illustrations are for
reference only and are not drawn to scale.
NOTE
The following dies cannot be used in this tool because the crimp force required exceeds the limits of the tool:
58423-1, 58524-2, 58525-2, 58530-2, 58630-2, 91965-2, 217212-2, and 2063030-1.
