Te Pari - www.tepari.com - FREEPHONE 0800 837 274
HD3 Sheep Handler Installation Manual
1214-V1
17
Racewell HD
SHEEP HANDLING SYSTEMS
SETTING UP A TRU-TEST XR/ID3000
From the weigh screen, press
to access the
Weighing Screen Setup
screen
Ensure both
FID
entries on the screen are set to off
X
,
press
when done
From the weigh screen, press
then the blue soft key below the
tab
This will take you to the
System Setup
screen, set the following:
DAMP SYSTEM: Super damp III (Sheep)
WEIGHT RECORDING: Auto
Press the back arrow
then the blue soft key below the
tab
This will take you to the
Drafting Setup
screen, set the fields shown here as follows:
DRAFTING: √
(on)
DRAFTING RANGES: 3
- if using 3 way drafter or set
6
if using the 6 way drafter
ICONS: Large Pen No
DRAFT BY: Weight
(on XR3000, not shown on ID3000)
Enter your desired drafting weight ranges and “draft to pen” options:
RANGE
FROM
TO
PEN
1
0
15
1
2
15.1
24.0
2
3
24.1
40.0
3
Press the back arrow
twice to return to the main weigh screen
Press
and
together to enter the
Specialised Setup
screen,
then press the blue soft key below the
tab and set the fields shown here as follows:
WEIGH TIME: 1.5
- you may increase this value for greater accuracy
START WEIGHING: SCP Command
DELAY: 0
To complete setup press the back arrow
twice to return to the main weigh screen
Important
When using the XR/ID3000 with Iconix load bars the sensitivity and load bar capacities must be checked and
changed if required to the values shown below To do this press
and
buttons together then
press the blue soft key below the
tab, and set the following:
Iconix IC2000
600 or 1000mm load bars
Capacity 2000kg
Sensitivity 1 325
Iconix IC3000
1000mm load bars
Capacity 3000kg
Sensitivity 9941
Navigation - Use the arrow buttons to move the highlighted block to the
entry then press enter for options, arrow to the option you want and press enter
