GB -
-
Plug the male antenna plug from the StereoBOOMM
®
into the car radio.
•
If the car has DIN type (1), make the connection directly.
•
If the car has ISO type (2), make the connection via the conversion plug (3).
•
If the car has FAKRA type, make the connection via the conversion plug (4.1).
-
Select a frequency with the 4 dip switches on the StereoBOOMM
®
. The fre-
quency table is printed on the backside of your StereoBOOMM
®
and below.
Please take a close look at this frequency table!
-
Connect the + wire to the red or yellow wire with a fuse, that goes to your car radio.
We recommend to connect the + wire of the StereoBOOMM
®
to the Ignition wire.
