TE Connectivity SGI 1.25, Application Specification

Page: 5 / 22

114-106497
Rev 5
5 of 22
2. REFERENCE MATERIAL
2.1. Revision Summary
Revision to this application specification include:

Add SGI 1.25 Cap Housing single row 10P, dual row 20P, Tab contact

Update crimp parameter

Add PC board and header assembly placement information in 3.10,3.11.
2.2. Customer Assistance
Reference Product Base Part numbers are stated in Figure 2. Use of these numbers will identify the product
line and help you to obtain product and tooling information when visiting
www.te.com or calling the number at
the bottom of page 1.
SGI 1.25 connector
(Single Row or Dual Row)
SGI 1.50 connector
(Single Row or Dual Row)
Product Type
Base PN
Product Type
Base PN
Single Row Dual Row Single Row Dual Row
Header Assembly,
SMT, Right Angle
2360538 NA
Header Assembly,
SMT, Right Angle
2360545
-
Header Assembly,
SMT, Vertical
2360540
2376974
2456589
Header Assembly,
SMT, Vertical
2360547 2427710
Plug Housing 2371404
2376950
2456588
Plug Housing 2382946
2426397
Receptacle
Terminal
2371403
2454997
2371403
2454997
Crimp Terminal
2371403
2454997
2371403
2454997
Cap Housing 2428107 2428108 - - -
Tab Terminal 2428106 - - -
TPA 2383410 2426398
Figure 2
2.3. Drawings
Customer drawings for product part numbers are available from www.te.com . Information contained in the
customer drawing takes priority.
2.4. Manuals
Manual 402-40 can be used as a guide to solder. This manual provides information on various flux types and
characteristics with the commercial designation, flux removal procedures, and a checklist for information on
soldering problems.
2.5. Specifications
Product Specification 108-106451, 108-160851 and Qualification Report 501-106475, 501-160511 provide
product performance and test results.