408-35051
Rev
A
8
of 11
4. Release the terminal lock (Figure 8) to fix the sub-assembly in place.
Figure 8: Releasing the terminal lock
5. Fully cycle the tool until the ratchet releases and allows the handles to fully open.
CAUTION
Make sure that both sides of the wire barrel are started evenly into the crimping section.
Do not
attempt to crimp an
improperly positioned contact.
6. Remove the crimper contact and inspect according to TE Specification
crimp height. See also Table 4.
Table 4: Crimp height specifications for outer contact tools
Hand tool
Ferrule
Cable type
Crimp height
2335300-1
2298116-1 (socket)
2298123-1 (pin)
RTK031
3.55±0.04
2335300-2
2298494-1 (socket)
2298506-1 (pin)
RG174
3.00±0.03
