EPP-2844-INT-9/16 4/20
Position the inner insulation tubes centrally over the
connector area.
Shrink down the inner insulation tubes, starting in the center
of the connectors, working towars the ends.
Before shaping the cores and laying them to each other,
allow the inner insulation sleeves to cool down.
5
Completion of the joint
Position the outer sealing sleeve over one of the cleaned
cable ends. Position the inner insulation tubes over the
long core ends.
2
Inner insulation tubes
Outer sealing sleeve
M4
EN
M3
Wire brush the aluminium conductors. Fit the conductors into
the connector.
Joint the conductors by crimping or by mechanical
connection.
Remove any sharp edges.
Clean and degrease the insulation.
C3
C4
1 2 4 3
NOTE -
When continuing, choose OPTION:
• OPTION S:
Installation using
Outer Sealing Sleeve
-
see steps
6 S - 7 S
.
• OPTION W:
Installation using
Wraparound Joint Sleeve
- see steps
6 W - 8 W
.
