114-101088
6.
CONNECTOR HANDLING
6.1
Plugging Connector
- Push the plug fully until hearable snapping into the header
-
Verify that the connectors are fully locked with a light tug, do not pull on the wire. If the
connection is not correct plugged, it will not be able to activate the CPA.
-
Push the CPA forward (see figure 19). The locking latch is in this position blocked and it will not
be possible to push down the Locking latch for opening the connection.
Figure 19
6.2
Unplugging Connector
-
Pull the CPA back (see figure 20)
Figure 20
Rev B1
17 of
19
