114-94438 REV C1
23
of 36
Crimp the conductors to the PIN DIA8.0 CONTACT [Pos. 12] with the specified tools. Care shall be
taken that all braids are caught in the crimp. Not inserted braids may jeopardize HV requirements! Wires
shall be completely inserted to be visible through the inspection hole (Figure 31).
Crimp height H shall be conform to dimension acc. table 1
.
Take care to distance between OUTER FERRULE [Pos. 16] and Pin contact [Pos. 12] as shown
in figure 32.
ATTENTION:
Any damage of the wire isolation must to be avoided!
+1.25
0
5
Figure 33
Figure 31
Figure 32
Summary of Contents for CCS1
Page 26: ...114 94438 REV C1 26 of 36...
