409-35001
Rev C
84
of 92
Network Viewer
The Network Viewer screen (see Figure 93) displays information about the connection from the HMI (Human
Machine Interface) computer to the rest of the machine software. Information about any MES machine
connections can also be viewed here.
Figure 93
Beckhoff Configuration
The Beckhoff Configuration screen displays information about the Beckhoff PLC controller used in the machine.
This screen is primarily for use by TE personnel for troubleshooting purposes.
Beckhoff Remote Desktop
The Beckhoff Remote Desktop screen is used to launch the remote desktop utility that allows access to the
Beckhoff PLC computer. This screen is only used for access the barcode scanner utility software and other
third party device software
for setup and maintenance purposes. Click the “Launch Remote Desktop” button
(Figure 94) to launch the remote desktop viewer and access the Beckhoff PLC computer.
Figure 94
