408-8907
3 of 3
Rev B
Figure 5
4. Insert the spring into the upper stripping jaw by
bending it at an angle as shown in Figure 6.
5. While maintaining spring pressure, rotate the
upper stripping jaw pivot counterclockwise, and
engage the pivot pin.
6. Ensure that the upper stripping jaw is in proper
position in the tool housing.
7. Replace the wire stop.
6. ORDERING INFORMATION / REPLACEMENT PARTS
The only part that is replaceable is Wire Stripper Blade
Assembly 1424946-1. Order this part or additional wire
strippers through your TE Connectivity
Representative, or call 1-800-526-5142, or send a
facsimile of your purchase order to 717-986-7605, or
write to:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
7. REVISION SUMMARY
•
Deleted text in Section 2, DESCRIPTION
Figure 6
Upper
Stripping
Jaw
Screwdriver
Screwdriver
Lower
Stripping
Jaw
Top View
Side View
Upper Jaw
(About 90º to Tool)
Spring at
Angle
Pivot Pin
