TE Connectivity 575937, Instruction Sheet

Page: 1 / 2

Instruction Sheet
1 of 2
© 2016 TE Connectivity family of companies
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION 1-800-522-6752 This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
www.te.com .
411-1040
27 JAN 16
Rev B
TOOL
NO.
CRIMP
SYMBOL
WIRE SIZE
mm [CMA]
INSULATION DIAMETER
mm [in.]
TERMINAL
NO.
TERMINAL
H.P. NO.
575937
A
0.3-0.75
[600-1500]
1.39-2.54
[.065-.100]
163240 163242
163241 163243
B
0.5-1.0
[1000-2000]
1.65-2.79
[.065-.110]
160495 160565
160496 160566
575938
A
1.0-1.5 MM
[2000-3000]
2.28-3.3
[.090-.130]
160497 160567
160498 160568
B
1.5-2.5
[3000-5000]
2.54-3.8
[.110-.150]
160497 160567
160498 160568
Figure 1
1. INTRODUCTION
Crimping tools 575937 and 575938 are used to crimp the MATE-N-LOK Terminals listed in the table in
Figure 1. Use this table to select the proper tool for the wire size to be used.
NOTE
Dimensions in this instruction sheet are in millimeters [with inches in brackets]. Figures are for reference only and are not
drawn to scale
Reasons for reissue are provided in Section 5, REVISION SUMMARY.
2. WIRE STRIPPING
Strip the wire 5.2 mm [.200 in.] for both the pin and socket terminals.
3. INSULATION CRIMPING ADJUSTMENT
1. The insulation crimping jaws have three adjustments.
2. Place the insulation crimping adjustment pin in the No. 3 position. See Figure 1.
3. Place the terminal in the tool according to Paragraph 4, and insert the unstripped wire into only the
insulation barrel.
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low
volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
MATE-N-LOK* Terminal
Crimping Tools
Crimp Symbol
Stamped Here
Insulation Crimping
Adjustment Pin in
No. 3 Position
CERTI-CRIMP*
Hand Crimping Tool
Ratchet Control
Locator Slot
Wire Barrel
Insulation Barrel
Socket
Pin
5.2 [.205]
5.2 [.205]
OR
IGIN
A
L
IN
STR
U
C
TION
S