USER'S MANUAL
The moving skate is a tool for heavy transportation. Please read the instructions
before using it. It is particularly important for the safe and smooth completion of the
handling tasks and prolonging the service life of the handling tool.
1. Due to the uneven road surface and some unforeseen reasons, not all the wheels
of each skate may be involved in the work during the work, so it is recommended that
you put enough excess force when using the skates. CRA type is generally used at
50% of the nominal capacity.
2.The road surface is uneven, which greatly affects the service life of ordinary skates,
and will cause the break down of the skates or damage of the wheels.
When working on rough and uneven roads, we have special skates suitable for rough
and uneven roads.
3. When using a skate, it should be moved at a low speed. If fast moving,it is too late
to deal with possible dangerous situations (such as the situation where the skates
slides out), which may cause danger to the heavy objects and personnel.
4. When the load is much lower than the rated load of the skate, the steering
performance of the skate is good. If in the case of a heavy load, the steering
performance of the skate decreases. The degree of load is not easy to quantify, as
long as the operator feels the steering effort.
It is necessary to pay attention not to force steering. Forced steering under heavy
load may cause PU rubber wear on PU wheels or damage to wheels and bearings.
Under heavy loads, lifting tools such as claw jacks can be used to lift heavy objects
and then steer the skate.
5. The skate is not suitable for transportation on the road with a steep slope. If the
skate is on a road with a steep slope, the skate should be firmly connected to the
heavy object, and the mechanical traction device or fixed traction should be used to
prevent the heavy object from being out of control. Dangerous situations may occur
in the backward movement that may result from loss of traction.
6. The combined handling of single or two skates may cause instability of heavy
objects. Unstable handling is very dangerous. More than 3 skates should be used in
combination. Generally, 4 skates are commonly used as a group. When several
skates are jointly transported, the weight is evenly distributed on each skates to avoid
uneven forces between the transports. The specific tonnage specification and
quantity of the skates are based on the load weight to be transported.
7. The center of gravity of heavy objects that are too high or too narrow is unstable.
When using the skate, pay attention to anticipating the consequences of possible
overturning, and take corresponding and reliable measures for preventive protection.
8. When using a skate, it is necessary to remove obstacles such as gravel and iron
filings on the road.
9. When several skates work together, it is particularly important to maintain the
directional coordination of each wheel. Uncoordinated wheel movement will cause
heavy objects to travel difficult or not to move, and it is easy to damage the wheels.
Please pay special attention! When transporting by four skates, if each skate is
equipped with a turntable, then four handles can be used to control the direction, but
it is difficult to coordinate. You can also use the handles of the following two skates
Summary of Contents for CH-1.5T
Page 3: ......
