Instruction Sheet
1
of 5
© 2017 TE Connectivity Ltd. family of companies.
All Rights Reserved.
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
408-35019
20 MAR 17
Rev A
Part Number
Wire Dimensions
Die
Locator
Assembly
(1)
MOLEX
Contact
Size
[mm
2
]
Insulation
Diameter
Strip
Length
2844461-2
2063771-1
39-00-0429
39-00-0038
39-00-0220
39-00-0041
44476-1112
44478-1112
45750-1212
22-20 AWG
[0.30-0.50]
.067 - .091
[1.70 - 2.31]
.118 - .130
[3.00 - 3.30]
18AWG
[0.80]
.067 - .091
[1.70 - 2.31]
45750-3212
16AWG
[1.30]
.090 - .114
[2.29 - 2.90]
(1)
Supplied with die assembly. Also available separately.
Figure 1
1.
INTRODUCTION
This die assembly is used with SDE Closed Head Battery Tool 2217481-[ ] to crimp the contact/wire
combinations listed in Figure 1.
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low
volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
SDE Die Assembly; PN 2844461-2
This die is a “commercial" grade die and is designed
primarily for field installation, repair, maintenance work, or prototyping in industrial, commercial,
or institutional applications. Product crimped with this tool will meet the crimp height requirement for hand tools in the appropriate 114 Series
Application Specification, but may not comply with other feature parameters of the specification. TE Connectivity (TE) offers a variety of tools to
satisfy your performance requirements. For additional information, call the number at the bottom of this page.
