Industry leading design.
Innovative, wheel adjustable
900 lumen Twin COB light features two LEDs side by side
for a 20% shorter body and even more light output.
Zero down time.
Use your worklight like your other
cordless tools, quickly detach the base and remove the
battery with the press of two buttons.
Versatile.
Works with batteries and/or charging base
from MWL700 or MWL900.
Page 1
PRODUCT INFORMATION:
Luminous Flux: Front: 900 lumens
Flashlight: 160 lumens
Color Temperature: 5700K
Switch: Adjustable dimming vertical
wheel and button switch flashlight
Operating Temperature: -10°C ~ + 46°C
Net Weight: 623g
Materials: Nylon and PMMA
chemical resistant material
SPECIFICATIONS
INTENDED USE OF THE TOOL
WARNING
DO NOT DISCARD – GIVE TO USER
1911361-14
900 LUMEN QUICK
CHANGE LIGHT ONLY
MWL900L
When unpacking, check the parts diagram and part
number listing on page 4 to make sure all parts are
included. If any parts are missing or damaged,
please call your distributor.
BEFORE USE
Study, understand and follow all instructions provided
with this product. Read these instructions carefully
before installing, operating, servicing or repairing this
tool. Keep these instructions in a safe, accessible place.
This tool is designed as a hand-held portable
rechargeable battery powered light source with
interchangeable lithium battery cells to provide direct
light to work areas. Do not use this tool outside of the
designed intent. Never modify the tool for any other
purpose or use.
Made in China
to Matco specifications
Caution: To help prevent personal injury
• Use of this product can expose you to chemicals
including ethylene glycol, gasoline vapors and engine
exhaust, which are known to the State of California to
cause cancer, birth defects, or reproductive harm. For
more information, visit www.P65Warnings.ca.gov.
Always wear ANSI approved safety equipment, safety
glasses and clothing when using this product. Study,
understand, and follow all instructions provided with
this product. Failure to read and follow all warnings
and operating instructions may result in damages and
serious injury or death.
• Users and bystanders should always wear ANSI
approved goggles when using this product.
• Never use this tool for any application other than for
which it
was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with
accessories not designed for it could result in serious
injury or death.
• Always select the correct accessories of the correct
size and
design for the job that you are attempting to
perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
WARNING
The manufacturer warrants this product to the original user
against defective material or workmanship for a period of 1
year from the date of purchase.
The manufacturer reserves the right to determine whether
the part or parts failed because of defective material,
workmanship or other causes. Failures caused by accident,
alteration, or misuse are not covered by this warranty.
The manufacturer, at its discretion, will repair or replace
product covered under this warranty free of charge. Repairs
or replacements of products covered under this warranty are
warranted for the remainder of the original warranty period.
The manufacturer or its authorized service representatives
must perform all warranty repairs. Any repair to the product
by unauthorized service representatives voids this warranty.
The rights under this warranty are limited to the original user
and may not be transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or
implied, including warranties of merchantability and fitness
for a particular purpose. Some states do not allow the
exclusion or limitations of incidental or consequential
damages, so the above limitations may not apply to you.
1 YEAR LIMITED WARRANTY
