408-35143
Rev A
5
of 7
3.3.
Flip-style locator
1. Make sure the die retention pins are installed and the die retention screw is secured (Figure 4).
2. Position the flip locator over the screw and locate it on the protruding die retention pins.
3. Install the locking nut and torque it to 56 N-cm.
NOTE
Each flip-style locator is specific to the die, and its operation is explained in the instruction sheet for that die.
Figure 4: Flip-style locator
1
Flip-style locator
2
Locking nut
3
Die retention screw
4
Die retention pins
