![background image](http://html1.mh-extra.com/html/te-connectivity/2359761-1/2359761-1_manual_3977538001.webp)
Instruction Sheet
1 of 6
© 2023 TE Connectivity Ltd. family of companies.
All Rights Reserved.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFOR1 800 522 6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
408-35334
16 APR 2023 Rev A
Figure 1: Crimping Die and Terminal Locator Assembly for HVP800-90 Terminals
1 Introduction
The crimping die assemblies listed in Table 1 are designed to be installed into the modular tool holders listed in
Table 1. The crimping die assemblies are designed to crimp HVP800-90 Terminals. Refer to application
specification
for detailed information about these terminals.
Table 1: Crimping die assemblies
Crimping die
assembly
Wire size
Terminal
part number
Modular tool
holders
2359761-1
16.0 mm2
2355358-3
2305470-1
2326378-1
25.0 mm2
2359762-1
35.0 mm2
2-2141211-2
50.0 mm2
3-2141211-2
NOTE
Dimensions in this instruction sheet are in millimeters with [inches in brackets]. Figures are for reference only and are not
drawn to scale.
Read these instructions thoroughly before crimping connectors.
Crimping Die and Terminal Locator
Assembly for HVP800-90 Terminals