RZ6 Analog Input Flow Diagram
Input signals for channel A are input either through the XLR input (Mic-A), the audio jack input
(Diff-A), or BNC (In-A). Input signals for channel B are input through the BNC (In-B).
A switch located to the left of the gain control knob allows a single gain setting for both
channels to be applied or bypassed completely.
RZ6 Analog Output Flow Diagram
Signals A and B
fl
ow out of the DAC and pass through the programmable and manual
attenuation modules prior to being output on the front panel BNC connectors (Out-A and Out-
B).
The signals for channels A and B are also passed to two stereo headphone output ports
labeled A&B and Mon. Individual stereo power ampli
fi
ers are used for the BNC and stereo
headphone outputs.
A single channel monitor speaker is connected either to signal A, signal B, or disabled based
on the monitor control switch setting. The monitor level knob controls the sound level of both
the stereo headphone jack labeled Mon and the monitor speaker.
RZ6 Multi I/O Processor | 8
