Interface Card
The RZ Processor connects to the PC through either a PO5e or UZ3
Hardware and Software Setup
Carefully unbox your equipment and install the PO5e or UZ3 according to the
. If you have a TDT
, then a PO5e card will already be
installed. Brie
fl
y - power down your computer* and place the PO5e card into an available PCIe
slot in your computer. Next, install your TDT drivers and Synapse software from the USB
Storage Drive that was provided with your shipment.
Below is a list of helpful online TDT resources with which users should be familiar before
starting:
Narrated walkthroughs of the Synapse software. These are very helpful for beginner users
fi
rst
learning the Synapse environment.
Short, unnarrated videos that demonstrate speci
fi
c actions in TDT software. These are
referenced several times throughout this document, so look out for the blue icon
Contains documentation for all TDT hardware and software. This is a great
fi
rst resource for
troubleshooting
Contain information about known hardware or software issues and associated solutions or
workarounds
TDT Tech Support offers phone and remote screen sharing support via GoToAssist to
customers M - F, 8 AM - 5 PM Eastern Time. For remote screen sharing assistance, please
email
to schedule an appointment.
*TDT drivers only function on Windows machines. Synapse will not run on Mac or Linux.
Note
fMRI User Guide | 9
