4. Standalone Use
(a) Enrolment
(c) Verification
5. Connecting to an ACU
To enrol a user, press the
Menu
button.
If you have registered an
Administrator
,
Manager
or
Enroller
account,
you are prompted to verify your identity (see Step c). After you have
done this, press the
Menu
button again.
Press the
OK
button to select the
User Manage
menu option. Select
Enrol User
and follow the on-screen prompts to:
1. Select a user ID.
2. Choose the enrolment method:
fingerprint (
FP
), password (
Pwd
) or both (
FP & Pwd
).
3. Scan a finger three times and/or enter a 5-digit password or PIN.
4. Repeat the procedure to provide the user with a backup fingerprint.
5. Save the template.
The verification process involves one or more of the
following steps:
Keying in your user ID
Scanning the fingerprint recorded during enrolment
Entering your password
Reading of a smart card
If you are using Wiegand mode, you will need to set up the Wiegand data format.
4. Use the ▼ key to select
Wiegand
and press the
OK
button.
3. Press the
OK
button to
select
System Opt.
1. Press the
Menu
button.
2. Press the ▼ key to select
Options
and press the
OK
button.
(b) Setting up Admin Accounts
(c) Configure Wiegand Mode
The first time the DIGIgarde PLUS is powered up, there are no user accounts. Your first step should
be to create one or more protected administrator accounts.
DIGIgarde PLUS recognises three admin levels:
Enroller
Manager
Admin
To set up an Admin, Manager or Enroller account:
1. Press the
Menu
button.
2. Press the
OK
button to select the
User Manage
menu option.
3. In the
User Manage
menu, use the ▲▼ keys to select the
Enrol Admin
option.
4. Use the ▲▼ keys to select the enrolment method: fingerprint (FP), password (PWD) or both (FP
& Pwd). Press the
OK
button.
5. The
Admin Accredit
screen is displayed. Use the ▲▼ keys to choose the management role.
6. Follow the on-screen prompts to scan a finger three times and/or enter a password.
(b) Configure Reader Format
Choose whether you want to use Wiegand format or Magnetic Clock and Data Format.
4. Use the ▲▼ keys to select
either
WG Type
(Wiegand) or
MAG Type
(Magnetic) mode.
3. Press the ▼ key to select
Data Out Type
and then
press the
OK
button.
1. Press the Menu button.
2. Use the ▼ to select
Options
and press the
OK
button.
WG-OUT
Power
TCP/IP
Network
(required for template distribution)
Data 0
Data 1
0V
LED
+12V
0V
ACU
(a) Connections
5. Use the ▼ key to select
Output Setting
and
press the
OK
button.
6. Select
Output Format
and
press the
OK
button.
7. Use the ▲▼ keys to select
the required format, for
example:
WG26 without ID.
