![TDS TDS TV User Manual Download Page 53](http://html1.mh-extra.com/html/tds/tds-tv/tds-tv_user-manual_3912051053.webp)
53
Questions?
Call 1-866-44-TDSTV or visit tdstv.com.
Note:
In the first 24 hours after deleting a message it can be restored by following these steps:
1) Dial in to your Voice Mail account using your phone. 2) From the main Voice Mail menu, choose
option 6 (review erased messages), choose option 1 (Voice Mail), then option 2 (restore).
7. To exit the application, press
BACK
or
EXIT
(if you have the TDS logo’d remote control) or
BACK
or
EXIT TO
(if you have the Cisco logo’d remote control).
LOCAL WEATHER
The local weather application is available on channel 219 (or 1219 in HD). It displays current
weather conditions for a city of your choice, plus the 5-day forecast, and radar maps, too.
To set up your weather app, follow these steps:
1. Go to channel 219 (or 1219 for HD). You should see the current weather tile for your general area.
2. Press
OK
on your remote to launch the app.
3. Once launched, press the
RIGHT ARROW
on your remote to navigate to the Settings Icon (small gear
in the bottom right corner of your screen), then press the
OK
on your remote.
4. Navigate to the appropriate city, using the
UP
or
DOWN ARROW
buttons on your remote. Highlight the
save icon and press OK on your remote.
5. Your location has been updated and saved.
Once set up, anytime you tune to channel 219 (or 1219) the weather will appear. You’ll notice the screen
automatically rotates through three different views of your local weather.
There are three tabs on the bottom of the screen:
•
Current:
provides details about current weather conditions.
•
Forecast:
shows the 5-day weather forecast for your local area.
•
Radar:
provides local, regional, and national radar maps.
Note:
To pause radar animation, select the still image icon on the right side of your screen
and press
OK
on your remote. To resume radar animation, press
OK
again.
If there’s a severe-weather alert:
• A Severe Weather icon will flash on screen. Select the icon using the
ARROW
buttons on your remote.
Then, press
OK
. An alert screen will display, showing details. Use the
ARROW
buttons accordingly.