15
Troubleshooting
Problem/Issue
Cause
Soluction
1
Cannot bind drone to
controller
a) Battery
b) Electromagnetic interference
c) Out of range
a) Make sure the batteries in both drone and
controller are fully charged
b) Clear out objects between drone and controller
c) Put drone and controller closer to each other
2 Drone does not turn on
a) Battery too low
b) Battery not fully plugged in
a) Charge battery
b) Battery fully plugged in the correct direction
3 Controller does not turn on
a) Switch didn't turn on
b) Battery didn't install correctly
c) Battery power too low
a) Ensure switch is turned on
b) Ensure battery fully plugged in correctly and
securely
C) Charge the battery
4
Blades do not spin or
drone has difficulty taking
off the ground, LEDs are
flashing
Battery power level is too low
Fully recharge the battery
5
Unstable drone flying /
strong vibration
Damaged blade(s)
Replace the blade(s)
6
All blades spin but drone
does not take off the
ground or not flying
properly
Blades are not installed correctly
Reinstall the blades following the "Blade
Installation" section on page 12
7
Drone crashes
immediately
Blades are not installed correctly
Reinstall the blades following the "Blade
Installation" section on page 12
8
Drone crashes during 360°
Roll
Not enough space to perform
the rolling function
Ensure the drone is at least 9ft from ground and
9ft away from all other objects in all direction
9
Drone can not perform
360° Roll and LEDs are
flashing
Battery power level is too low
Fully recharge the battery
10 Cannot take photo or video
Micro SD Card not installed
correctly or damaged
a) Ensure Micro SD Card is fully inserted
b) Replace Micro SD Card
Summary of Contents for 61351
Page 16: ...16 Thank You Happy Flying...
