10
Special operation controls
Speed/Sensitivity Selection
The drone's flying speed and sensitivity can be adjusted by pressing the Speed Selection
button. Pressing the button will switch the speed in the following speed settings:
Low > Medium > High > Low
Auto return
Pressing the auto return button (the Throttle/Rudder stick) during the flight will force the drone to
find the shortest route back to its original take off location. For best results, align the body of the
drone in the same direction as the controller before binding.
Low
Medium
High
Tip: It is best to start flying in default low speed setting until you are comfortable to the flying speed.
Flying speed/sensitivity setting can be adjusted before or during flight. Each time the drone starts,
the flying speed will be reset to default (low speed) setting.
Cautions:
Use this feature with caution, ensure there
are no obstacle in its way.
Face the same direction
Yellow
Blade
Yellow
Blade
Headless Mode
In headless mode, drone flies from your viewpoint no matter which direction the drone is flying.
E.g.: if you push the controller to left the drone will fly to left, from your viewpoint - regardless of
what direction the drone is facing/pointing. Which allows you to give up worrying about
orientation of the drone altogether.
To enter headless mode:
1) Before taking off, position the drone in such a way that "its front is your front".
2) Press down the Headless Mode button (the Elevator/Aileron stick) to enter headless mode.
3) Press the button again to get out of headless mode.
Note:
- The controller will keep on beeping continuously when the drone is in headless mode.
- The rear LED on the drone will flash continuously during headless mode.
Summary of Contents for 61351
Page 16: ...16 Thank You Happy Flying...
