APPENDIX B
Maintenance
The design of the VCS-04 is such that little or no maintenance is required under normal
usage. To ensure years of uninterrupted service from VCS-04, perform the following
procedures:
1
Inspect the VCS-04 on a regular basis to make sure that the unit is clean and functioning
properly, and all cables and connectors are securely fastened and in good condition.
2
Tighten the screws that mount the SI-300CC to the rack and the VC-04 to its stand.
Normal us may cause equipment screws to loosen over time.
3
Verify that the product has not been damaged in any way. If damage has occurred, it
should be repaired properly. Call your TDK RF Solutions representative to request
service. Physical damage to the product should be repaired prior to placing it in service.
Perform the recommended maintenance every three months. This time may be varied
depending on the frequency of use
TDK RF Solutions
Video Camera System
User Manual
20
Summary of Contents for VCS-04
Page 2: ......
Page 15: ...TDK RF Solutions Video Camera System User Manual 9 ...
