AN-000240
Document Number: AN-000240
Page 5 of 23
Revision: 2.0
2
HARDWARE SETUP
2.1
SMARTSONIC (DK-CH101) PREPARATION
Before using the demo, the DK-CH101 SmartSonic needs to be flashed with the proper f/w. Download and unpack the latest or
desired f/w release package. This step can be skipped if the DK-CH101 is known to have the correct f/w. Below is the list of available
f/w package/s available. The X in the file name is the version number. The latest file should be provided.
Table 2-1. Available f/w for Standalone Demo
Description
FW
Floor Type GUI logger
Gui-demo-smartsonic-robofloor-logger_X.XX.X.hex
2.1.1 DK-x01 SmartSonic and Daughterboard Hardware
The DK-x01 SmartSonic hardware out-of-box is shown below. Note that the horn on the daughter board may differ from the picture.
Refer to the reference documentation for more information.
Figure 2-1. SmartSonic Hardware basics
