- 15 -
TDK-Lambda
EZA2500W series
Quick Manual / Practical (II)
④
Click the “Other settings” tab.
⑤
Click “READ ALL” to display the current value of EZA.
⑥
Overwrite the parameters enclosed by the red line in the figure below if necessary
and click “WRITE”.
⑦
[BCF] Set battery function settings. Unless there is a specific reason, click all the
check boxes surrounded by blue dotted lines to enable them, and click "WRITE".
⑧
Click "READ ALL" to confirm that the parameters have been changed.
⑦
④
For the meaning of each parameter, refer to Quick Manual Practical I,
EZA2500W Communication Manual p15-16.
Each parameter can be overwritten (changed) even after the EZA main
circuit is started.
The written parameters are retained even when the control board power
is turned off, and remain valid at the next startup.
⑤
⑥
⑧
