- 8 -
TDK-Lambda
CUS150M1
Instruction Manual
(2)
Conditions to meet Isolation and Withstanding Voltage standard.
Keep 5mm space from the surfaces and sides of PCB. Especially, 8mm space is necessary from the solder surface. If the space is not
enough, the specification of isolation or withstanding voltage will not be satisfied.
(3)
(Protective Earth) should be connected to the earth terminal of the equipment. Also the mounting hole are should be connected to
the Chassis by metal spacer. If not, the conducted noise, radiation noise and output noise may increase. Please refer to below setup.
