7. Mounting
Carefully insert the device into the panel cut-out. Insert the mounting bracket from
the back and push towards the panel until the device sits tight. Make sure the
mounting bracket is snapped into the side of the housing. To ensure IP65
protection (dust and water jet) when mounting in a front panel, use optional gasket
(separately available).
8. Specifications
DPM72-PP
Supply
12 - 24 V AC/DC ±10% (50/60 Hz ±10%)
or via USB, galvanically isolated
Power consumption
Max. 1.2 W
Display
LCD graphic display 192 × 160 pixels
Measuring range voltage
±50/60 mV AC/DC shunt, 10 - 500 Hz
Accuracy voltage
±0.5 % true RMS
Internal resistance voltage
20 kΩ
Measuring range ampere
20 mA AC/DC (max. 100 mA), 10 - 500 Hz
Accuracy ampere
±0.5 % true RMS
Internal resistance ampere
6.2 Ω
Measuring value update
5 Hz (32 kHz sampling rate)
Recording of measurement
36 seconds to 14 days,
180 internal memory locations
Alarm outputs
2 optocoupler outputs max. 30 V DC, 50 mA
Permissible voltage between
supply and measuring inputs
< 50 V AC, < 75 V DC
Operating temperature
0 °C to +50 °C
Storage temperature
-20 °C to +70 °C
Front panel
72 mm × 72 mm
Panel cut-out
68 mm × 68 mm
Mounting depth
51.8 mm
Protection front
IP65 from the front
9. Cleaning
Observe the safety instructions before cleaning the device. Clean the device with a
dry lint-free soft cloth. Do not use solvents.
10. Contact Information
TDE Instruments GmbH, Gewerbestraße 8, D-71144 Steinenbronn
phone: +49 7157-20801
E-mail: [email protected]
Internet: www.tde-instruments.de, www.digalox.com
-----
8
-----
