3. Description
The measurement types analogue signal and AC/DC shunt are supported. Minimum
and maximum values are recorded and can be displayed optionally using an
external switch. Measured values are recorded over a time span of 36 seconds up to
14 days. The time base as well as the display of the measure history can be
switched by an external switch. The measured values remain stored as long as the
device is supplied with voltage.
The following parameters can be adjusted using the configuration software “Digalox
®
Manager”: scale endpoint, scale caption, display style (pointer, tachometer, bar
graph, and more), splash image, thresholds for alarm output, hysteresis, and more.
Recorded measurement values can be read and a continuous transmission of the
actual measuring value can be enabled. Using the software, values can be viewed
and exported as CSV.
Front
1
Unit or free text
2
Threshold values
3
Upper scale caption
4
Graphical measurement display
5
Digital measurement value
6
Lower scale caption
Back
1
2 optocoupler switch outputs
2
DIP switch for setting upper scale
caption and display value (mode)
3
Supply voltage input
4
Jumper pins J1 – J6 for
activating/switching of graphical
historic data display, min/max display,
auto-scaling and display value (mode)
5
USB Micro-B interface
6
Measurement inputs
-----
2
-----
