13
11
12
13
3
4
16
4
5
6
Front bottom view
Fig. 6
11
12
13
3
4
16
4
5
6
Front bottom view
Fig. 6
Attach the Front Wheel & Steering Wheel
Turn the vehicle body upside down
1.
Slide a
Ø12 Washer (4)
and a
Front Wheel (3)
onto the
Front Axle (16)
.
2.
Then slide a
Ø12 Washer (4)
onto the
Front Axle (16)
.
3.
Tighten a
Lock Nut (5)
to the end of the
Front Axle (16)
with a
Spanner (18)
.
DO NOT over tighten
.
4.
Insert the tabs on the
Wheel Cover (6)
into the slots on the
Front Wheel (3)
.
5. Repeat the above steps 1-4 for the other wheel.
6. Turn the vehicle body over.
7.
Plug the sound unit connector on the
Steering Wheel
(11)
into the connector on
the vehicle body.
(Fig. 6)
8.
Fit the
Steering Wheel
(11)
to the end of the
Steering Column
.
9.
M5x45 Machine Screw (12)
and
Lock Nut (13)
are pre-assembled on
Steering Wheel
(11)
. Remove machine screw and lock nut from
Steering Wheel
(11)
using
screwdriver
.
10.
Line up the holes on the
steering wheel
with the holes on the
Steering Column
, insert the
M5x45 Machine Screw (12)
.
11.
Fasten a
Ø5 Nut (13)
on the opposite end of the
Screw
with a
Screwdriver
.
Summary of Contents for UTV Quad
Page 2: ......
