6 Piece Dining Set - Table Assembly
6
Item #20560/20574
6 Piece Dining Set - Table Assembly
Item #20560/20574
7
Customer
Service
1-800-599-8898
Customer
Service
1-800-599-8898
Assembly Instructions
Assembly Instructions
Step 3:
Insert four Screws 1/4x55 (D) through holes of Legs (B) and through Leg Ring (C). It
is advised to keep these parts loose until unit is completely assembled. Follow these
same steps to assemble the second Leg Ring (C) to the additional set of holes on Legs
(B). Once assembly is complete, tighten all screws and nuts. Insert Covers (G) over
screw heads of Screws 1/4x55 (D). Insert Nut Covers (H) over Nuts (E) to hide their
appearances.
G D
B
E
C
H
C
I
I
Turn the table right-side up. Remove the center cap from the Table Ring (I). Unscrew
the lower-half of the Table Ring (I) by turning it counter-clockwise. When separated,
you’ll have three parts including: center cap, lower-half with inside threading, upper-
half with outside threading. Reach under the table with the lower-half in one hand,
while reaching over the table with the upper-half in the other hand. Bring the two
pieces together at the center of the table where a hole is cutout in the glass. Screw the
two pieces back together and tighten by turning the lower-half clockwise. Place the
center cap back when an umbrella isn’t being used.
Summary of Contents for 20560
Page 6: ......
