FBD120/180/200/220 SECTIONAL GARAGE DOOR OPENER
12
5
3
1
6
4
7
2
SET
UP
DOWN
LEARN
SET
UP
DOWN
LEARN
SET
UP
DOWN
LEARN
SET
UP
DOWN
LEARN
SET
UP
DOWN
LEARN
SET
UP
DOWN
LEARN
SET
UP
DOWN
LEARN
The door will do a complete
open and close cycle.
Fig.13
Adjusting Obstruction Force Sensitivity
(Fig.14)
If the door meets an obstruction during closing, it will stop and reverse about
15cm~20cm.
1. Press and hold “SET” button for 4 seconds until ‘P1’ is displayed on LED.
2. Press “UP” button, ‘P2’ will be displayed.
3. Press the “SET” button, the opener is now in force adjustment mode.
4. Press “UP” button to increase force setting, maximum force setting is level 9 (F9).
Press “DOWN” button to decrease force, minimum force setting is level 1(F1).
5. Press “SET” button to confirm the setting.
