TD TD Generation Portal 2 with PINpad, Quick Start Manual, Page: 17 / 32

13
b) The customer confirms the amount: NO or YES .
Cashback (optional)
You will only see these steps if you have cashback enabled on your terminal .
a) The customer indicates whether they want cashback ( NO or YES ) .
b) The customer enters or selects the cashback amount and presses OK .
c) Customer confirms that the amount is correct ( NO or YES) .
Payment method
4. Perform one of the following payment methods: Insert or Tap .
Insert
a) The customer inserts their debit card .
b) The customer selects the account to use: CHEQUING or SAVINGS .
c) The customer enters their PIN and presses OK . Go to step 5 .
Contactless
a) The customer taps their contactless-enabled debit card on the screen . In
some cases the customer may be required to enter their PIN . Go to step 5 .
5. The screen shows that the transaction is completed with an authorization
number or approved message and the receipts print . You can REPRINT the
receipt or FINISH the transaction .
6. If there is a balance left owing, go to the Split Payment instructions in step 3 .
Void
This option recalls a transaction so that you can void it . The following instructions can
access any transactions that were performed in the current open batch . If a day close
has been completed you cannot recall transactions made prior to the day close and you
must do a refund, not a void .
1. Tap the Home icon

Void .
2. Enter the trace # from the receipt of the transaction to be voided and tap OK .
3. Confirm that the transaction is to be canceled ( NO or YES ) .
4. If this is a debit card, the customer inserts their card, enters their PIN and
presses OK .
5. The screen shows that the transaction is completed with an approved message
and the receipts print . Go to step 2 .
6. You can REPRINT the receipt or FINISH the transaction .