TCS SZ1063, Product Manual

Page: 1 / 10

2800 LAURA LANE • MIDDLETON, WI 53562 • (800) 288-9383 • FAX (608) 836-9044 • www.tcsbasys.com
1
SZ1063/SZ1064
Modulating Fan Coil
Thermostats
Product Manual
Description
The SZ1064 is a microprocessor based programmable
modulating fan coil thermostat and the SZ1063 is a non-
programmable modulating fan coil thermostat.
Features
• Stand-alone or network operation
• No battery backup required
• Minimum on/off times for HVAC equipment protection
• 32-character LCD display
• Six status LEDs
• Remote room sensing capability
• User setpoint adjustment limits
• Three speed fan
• System and fan switching with access lockouts
• External input for setback or aquastat changeover
• Access to programming may be locked out or limited
with the use of an access code
• Fahrenheit or Celsius temperature display
• Control for two or four pipe systems
• 7-day programmable time clock
• Optional pipe sensor inputs for changeover (SZ1064
only)
• Adjustable delay on start-up and power-up for soft
starts
• Smart recovery (SZ1064 only)
• Local and remote override capability
• External time clock and override options
• Auxiliary output for heat, cool or time clock (SZ1064
only)
Contents
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting Clock & Schedule . . . . . . . . . . . . . . . . . . . . . . . 6
Sequence of Operation . . . . . . . . . . . . . . . . . . . . . . . . 6
Checkout & Troubleshooting . . . . . . . . . . . . . . . . . . . . 8
LED Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Limiting Occupant Access . . . . . . . . . . . . . . . . . . . . . . 10
User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Mounting
The SZ1063 and 64 are designed for wall mounting
using two #6 sheet metal screws, either over a horizon -
tally installed 2" x 4" junction box, or directly to block or
drywall.
For best results, the thermostat should be mounted on
an interior wall which reflects normal room environment,
at a height of approximately five feet from the floor.
Avoid areas exposed to direct sunlight, unusual heat
or cool sources, open doors and windows, unventilated
locations and hot or cold air from diffusers.
If using a remote room sensor, it should be mounted in
the manner described above. The thermostat may then
be mounted in an area which is accessible for adjusting
its settings.
Caution: Remove power from thermostat prior to
mounting.
Communicating Thermostats
Communicating Thermostats
SZ1063 has been discontinued January 2013