15
EN
SETTINGS IN THE OSD MENU
The setting of ring tone volume and the selection
of the required ring tone is realised in the symbol
menu of the display when in stand-by mode (spe-
aking and video off).
Setting ring tone volume / ring tones
selected parameter menu
main menu
selected parame-
ter menu
toolbar to select parameter
selected parameter
menu ring tone
parameter
adjusted value of the
selected parameter
0, 1, 2, ..
toolbar to select parameter
1.
Shortly press the menu button
. The
main menu is called up.
2.
Select the menu ring tone parameter with the
navigation buttons UP
or DOWN
.
Confirm the selection by pressing the menu but-
ton
again.
3.
You are in the menu ring tone parameter.
Select the required ring tone with the navigation
buttons UP
or DOWN
.
The selected ring tone sounds immediately.
When selecting the communication volume, the
actual ring tone sounds immediately in the selec-
ted volume.
The menu is switched off automatically after 10
seconds, if no button is pressed. Shortly press
the function key
, to switch off the menu
immediateley.
door call ring tone selection
floor call ring tone selection
internal call ring tone selection
ring tone selection for
sub ring tone 1, 2, 3, 4
ring tone volume
control function*
internal call*
external image buffer
ring tone parameter
date / time external
image buffer
delete external image buffer
* symbol appears only after the configurati-
on, not in factory setting
