2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 | www.tcsbasys.com
99
Configuration
Device ID: The Device ID is a BACnet address that identifies the unit on the BACnet network (similar to an IP address).
This number must a unique number. Once you have assigned a unique number to the unit, click the Update Device Info
button to save the number.
The Site Time section is used by the local network and the QD3041 until the Ubiquity Cloud Server performs a time syn-
chronization with the site.
Enter the timezone information in this section and click the Update Time Info button to save the setting.
Network Information
This section contains settings which control how the QD3041 connects to the Internet. All of these settings are deter
-
mined by your local network administrator or IT department.
Network Information – Use DHCP
Network Options
The QD3041 supports both static IP and Dynamic Host Configuration Protocol (DHCP) IP address allocations. When utiliz
-
ing DHCP addressing, the IP address settings are automatically assigned when communication is established. Enter host
name if needed (typically left blank).
IPV4 Network
If you are using a static IP address, deselect “Use DHCP” and fill in the static IP address information (IP Address, Gateway,
Subnet, DNS1 and DNS2 settings) established by the LAN/ WAN network administrator prior to installation.
