2800 Laura Lane • Middleton, WI 53562 | 800.288.9383 | www.tcsbasys.com
25
25
Appendices
Appendix C: Monitor and Keyboard
The QD3041 can be configured locally at the device using a keyboard and monitor. If using this method of configuration,
you will need:
•
Monitor with HDMI or DP(DisplayPort) connection (depending on your monitor, you may need a VGA-to-HDMI/DP
adapter).
•
HDMI-to-HDMI cable or DP-to-DP cable.
• USB Keyboard.
Connection Setup
1.
Connect the cable to the monitor and to the QD3041, matching up the corresponding ends (HDMI, DP). (See
Power and Communication Connections” on page
) Power on the monitor and switch to the proper input, based
on the cable used.
2. Plug the USB cable into a free USB port on the QD3041. Test keyboard connectivity by pressing Caps Lock to see if
the LED on the keyboard illuminates.
3. Reboot the unit by pressing and holding the Power button until the unit turns off. Release the Power button and
press it again to power the unit back on. This will cause the unit to recognize the monitor and keyboard.
4.
Configure the QD3041 as needed. (See
“QD3041 Configuration via Command Line Interface (CLI)” on page
.)
