What’s In The Box
• LT-50 handheld command station
• LT Panel (fascia panel)
• LT Panel fascia cover plate
• LT Panel assembly screws (2x)
• LT Panel mounting screws (4x)
• 2-pin screw terminal plug (Green) for DCC Track output
• Option jumpers (3x)
•
RJ-45 Cable (7ft/2.13M)
• LT-50 power supply (15V, 36W)
Specifications
DCC System
•
1.4A continuous, 2.8A peak current limit with soft start, configurable current
limit, and load reporting
• Integrated RailCom® detector
• Programming Track over main output with automatic switchover, supporting
Direct, Paged, and Register modes
• DCC accessory control for addresses 1 - 2044
• Up to 20, 10-step Macros, including LCC accessory control
•
Configuration through on-screen menu
Throttle Features
• Handheld design based on the lightweight and ergonomic UWT-50
• Nine user-programmable buttons for convenient operations
• Encoder knob for throttle control and menu navigation
•
Plain English configuration through menu
• On-sceen help function
• Can be used as a throttle on LCC and NCE layouts
NMRA Layout Command Control (LCC) Features
•
LT-50-specific RJ-45 jack (1x)
•
RJ-45 jack for LCC communication through CAN-bus (3x)
• Expandable with additional LCC throttles (sold separately)
• 400ma LCC power injection points (2x)
•
Low-power DCC passthrough (optional with configuration)
•
Configuration through CAN-bus interface to PC (sold separately)
• Firmware updates via LCC interface
More information than can fit into this guide can be found online.
To read our comprehensive documentation, visit
docs.tcsdcc.com/wiki/LT-50
or use this QR code:
3
Summary of Contents for LT-50
Page 1: ......