34
switch button does not
respond by pressing.
video switch and check whether a
signal is available here.
Measure the voltage between P
and b. The voltage usually is
about 24 V.
If this is not the case; please
check the BUS-power supply.
Not both wires of the
video BUS are con-
nected.
Please check the connection of
the pluggable terminal.
Video image turns
white after a while.
Switching the supply
power off and on
again, the signal will
reappear. The video
image turns white
again after a while.
Thermal defect of the
outdoor camera.
A wire of the video BUS short-
circuits the P- or the b-wire. This
causes an impermissible in-
creased current. Please check the
wiring for shorts.
The camera is defect.
Cleaning
!
Avoid water from entering the device!
Do not use any abrasive detergents!
Clean the device with a dry or slightly wet cloth.
Remove stronger stains with a mild household cleaner.
Conformity
The declarations of conformity are available under www.tcsag.de,
Downloads, trade information.
Information on disposal
