11
Connecting
Connect the lines to the plugable
terminal according to the labbelling.
(Therefore, the terminal can be remo-
ved.)
Put the terminal on the contacts.
Setup the indoor station as end device
Put the terminating resistor J1 on the
two left contacts, if the device is in-
stalled at the end of a TCS:BUS vid-
eo strand.
(ex works) not plugged
plugged
a
b
E
P
M
C
V1
V2
Install the adaptor plate
Do use the adaptor plate only as tool
to mark the holes.
Do not use the adaptor plate as drill-
ing template!
Install the adaptor plate directly on
the flush-mounted socket or on the
wall (left and right) with the 2 included
screws.
The protective foil serves to conserve
the contact reliability and prevents
e.g. an overpainting. The foil can be
removed during the installation of the
adaptor plate. Remove the foil only
before installing the device!
Adaptor plate
Protective foil
