TCS ISW3130, Product Information

Page: 6 / 16

6 07/2015
TCS TürControlSysteme AG Subject to technical changes.
E-
Mail: hotline@tcsag.de • www.tcsag.de
PI_ISW3130-uk 2 A
Short description

hands-free talking, manually controlled duplex communication can be activated

large, deteched, blue door release button

large speech button

light switch button

function key (fixed assignment with control function 8, alternate allocation can be acti-
vated: internal call, door release automatic, call diversion)

call OFF button for ring tone mute with optical indication

optical indication of door calls by LED (green)

optical display of a business while an established communication by LED (green)

sending the sender serial number in case of internal calls

ring tones can be adjusted by the user, selection of 13 ring tones with improved quality

voice volume and ring tone volume can be adjusted manually

acoustic call distinction between 2 front-door stations (with the configuration software
configo™), flat door (floor door) and internal call

a parallel call can be activated (with the Service Device TCSK-01 or confi
go™)

audio privacy function and automatic call cut-OFF (after 2 min)

lower cover with plugged pined screw terminal can be pre-installed and can be
equipped alternatively with the door telephone

optical and acoustic fault indication

can be functional extended due to mounting places for call relays, control for radio sig-
nal device

energy-efficient due to low stand-by consumption of only 0.025 W

automatic call acceptance after an internal call can be activated / deactivated
Installation
Mounting site
The indoor station has to be installed in accord-
ance to a minimum distance to walls or other
obstacles:

lateral space 5 cm and below 10 cm.
Install the lower cover

For placing the connection cables without
any problems, a flush-mount socket must be
installed behind the device.
Position the flush-mount socket below the
cable conduit.

Install the lower cover with three screws.
TIPP: Avoid tearing of the straps:
For fixing the scraps do not use counter-head screws
Rather use flat washers!