I Think Customer’s Success
7
ⓕ Thermal print head … Enables the cards to be printed in 600dpi
ⓖ Ribbon support ……∙ Enable the ribbon to be put
ⓗ Cover lever ………∙∙∙∙ Enables the printer cover to be opened and closed
ⓘ Dispenser …………∙∙∙ Receives the cards for printing
ⓙ Dispenser cover …∙∙∙
INSTALLATION
1. Computer environment setting
Change the parallel mode in the BIOS(CMOS) setup as the following steps.
1) On the booting screen after turning your computer on or rebooting, press
<DEL> key so to enter the BIOS(CMOS) setup screen. (Press <F1> key or <F2>
key instead in some different computers.)
2) Select [Integrated Peripherals] menu.
(Select [Peripherals] or [Advance] instead in some different computers.)
3) Check if [Onboard Parallel Mode] is set as [ECP+EPP] option. Otherwise,
change the particulars to [ECP+EPP] option.
(If [ECP+EPP] option can’t be selected, select [ECP] option.)
4) After returning to the main menu with <ESC> key, select [Save & Exit] menu.
Press <Y> key and then <Enter> key on the confirm question.
5) Your computer reboots with your changes saved. You should just wait for the
booting process and O/S starting.
4
5
Caution !
Do NOT change any other option or menu except what is mentioned above.
A wrong setting of BIOS(CMOS) setup can bring about some trouble or
unexpected result.
