DR
AF
T
3.2.9 Legacy Throttles
Some very old NCE, Ramtraxx, and SystemOne LCD throttles with older software revisions do not support
all of the latest Cab Bus commands. In order for these throttles to still work, there is a configuration setting
in the command station that can disable the use of these newer Cab Bus commands for any one or more
given cab addresses. This allows these older throttles to still be used with some degraded functionality.
Below is a list of older throttes and software versions that are known to require "Legacy Mode Enabled".
● SystemOne WCT-01 (V2.0 and earlier)
● SystemOne WCT-02 (V2.0 and earlier)
Because these older cabs have been out of production for more than 10 years, they are very difficult to
acquire for testing. Please contact TCS if additional throttle versions are found to require "Legacy Mode
Enabled", or if a throttle version is found to not work at all, so that TCS can update the list and/or provide a
fix. TODO: not implemented yet.
3.2.10 Unsupported NCE, Ramtraxx, and SystemOne Hardware
Device
Comments
NCE Auxiliary Input Unit (AIU) Support is under development and will be provided in a future software
release which can be updated by the user.
NCE Mini Panel
Support is under development and will be provided in a future software
release which can be updated by the user.
NCE USB Adapter
Limited functionality. Only train operations supported.
NCE Macro Panel
No plans to support. This is not an officially released product from NCE.
Disclaimer
The list of items above is comprehensive as of the publication of this
document. It is possible that other unsupported products exist which
may not be listed here.
3.3 XpressNet™ Support
6
More information about XpressNET support can be found on the TCS Wiki at
https://docs.tcsdcc.com/wiki/XpressNET
.
6
XpressNet™ is a trademark of Lenz Elektronik GmbH
© 2022 Train Control Systems
Page 15 of 49
