TCS Carius CAI2000, Instruction Manual

Page: 9 / 16

6
Setting ring tone volume and ring tones
The setting of ring tone volume and the selection of
your required ring tone can be realised quick and easily
in the OSD menu of the display when in standby mode
(speaking and video must be deactivated).
Settings in the OSD menu
1. Shortly press the menu
button
. The main
menu is displayed.
2. With the navigation
buttons UP
or
DOWN the menu
ring tone parameter can
be selected. Confi rm the
selection by pressing the
menu button
again.
3. You are now in the
menu ring tone parame-
ter. With the navigation
buttons UP
or
DOWN the required
ring tone can be selected.
When selecting a ring
tone, the ring tone
sounds immediately.
When selecting the ring
tone volume, the current
ring tone sounds in the
selected volume after the
setting.
The menu is deactivated
automatically after ten
seconds if no button is
pressed or shortly press
the function key
.
Control function*
Internal call*
External image
buffer
Ring tone para-
meter
Date/time
external image
buffer
Delete external
image buffer
Ring tone volume
Ring tone selection
for door calls
Ring tone selection
for fl oor calls
Ring tone selection
for internal calls
Ring tone selection
for sub tones 1,2,3,4
*Symbol is displayed only after the confi gu-
ration, not in factory setting
Main menu
selected
parameter menu
toolbar for parameter menu
Menu ring tone
value of the parameter
0,1,2, ..
toolbar for parameter menu