background image

6

The following functions 

can be confi gured on 

your video indoor station 
and for the use of further 
indoor stations. Please 

contact your qualifi ed 

electrician.

Call an indoor station 

(internal call)*

To call another indoor 
station, press the function 
key 

 . A short acknow-

ledgement tone sounds if 
the call has reached its call 
destination. When the called 
device accepts the call a 
voice connection is establis-
hed. If required, the volume 
of the voice connection can 

be adjusted from a qualifi ed 

electrician.

* max. 1 call destination

Door release automatic

An incoming door call 
directly triggers the opening 
of the door if this function is 
activated. Press the function 
key 

   

 activated,

  the green LED is on,

press the function key 

  

again

 deactivated

Open the fl oor door

If the fl oor door call at the 
fl oor door is triggered, the 
fl oor door (instead of the 

front-door) can be opened 
with the door release button  

  within 30 seconds.

Parallel call

 

A second indoor station 
sounds simultaneously in 
case of an incoming door, 

fl oor or internal call. the ring 

tone sounds at both devices.

Call diversion

The incomning call is di-
verted to a second indoor 
station. Press the function 
key 

    

 activated,

  the green LED is on, 

press the function key 

  

again

 deactivated

Confi gurable functions

Summary of Contents for CAI1200





















Reviews: