TCS BRE2-EB, Product Information

Page: 4 / 8

4 02/2013
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de Subject to technical changes.
FAX: +49 (0) 41 94/ 9 88 129 PI_bre2eb_uk 1 A
Manual programming
Legend
Press button until
…
LED blinks slowly
Shortly press the button LED is ON
Release the button
further
|
period until
… |
Allocating the output to a bell button that is not programmed
shortly LED
press blinks
BRE2
shortly press,
LED blinks
1
shortly press,
ring tone sounds short LED
press is ON
Programming mode of the
system is switched ON
Output is allocated to
a bell button Programming mode of the
system is switched OFF
Allocating the output to a programmed bell button
shortly
LED
press blinks
BRE2
shortly press,
LED blinks
(for 30 s)
press as long as Prog2 tone, light
switch tone and ring tone sound
at the front-door station, release
shortly
LED
press is ON
output is allocated to a bell button Programming mode of the
system is switched OFF
Delete the allocation to a bell button
shortly LED
press blinks
press until the delete
tone sounds, release shortly LED
press is ON
Programming mode of the system is
switched ON
bell button deleted Programming mode of the
system is switched OFF
Allocate the output to a BUS action
BRE2
press until
release
the LED lights up
press the door opener or
press floor push-button or...
shortly press,
LED is OFF
execute required BUS action
Output is allocated to
the BUS action.
1) The BRE2 returns into the operating mode after 30 s, the LED expires. If you want to cancel the programming at this
point, switch off the programming mode of the system at the BVS.
within 30 s