background image

Temperature button 

 

Press the temperature button repeatedly to increase the target room temperature, from 15 to 40°C. Once 
the temperature is set, the digits will flash for 3 seconds and then the display will show the current room 
temperature.  Once the target temperature is reached, the device will automatically switch to fan mode. 

 

The device features a safety push button on its base, which will turn the device off if it is accidentally tilted. 

This feature can be performed using the TCP Smart App 

 

Colour Button 

 

Press to cycle through the options for the ambient light 

– Off, Blue, Red or Purple. The light can be 

operated independently of the Fan. 

 

This feature can be performed using the TCP Smart App 

 

CLEANING THE HEATER 

 

Always un-plug the heater from the wall socket and allow it to cool down before cleaning. Clean the 
outside of the heater by wiping with a slightly damp cloth and buff with a dry cloth. Do not use any 
detergents or abrasives and do not allow any water to enter the heater. 

 

STORING THE HEATER 

 

When the heater is not used for long period of time it should be protected from dust and stored in a 
clean dry place. 

 

CORRECT DISPOSAL OF THIS PRODUCT 

 

 

 

WARRANTY INFORMATION 
 

The manufacturer provides warranty in accordance with the legislation of the customer's own country of 
residence, with a minimum of 2 years, starting from the date on which the appliance is sold to the end user. 

 

The warranty only covers defects in material or workmanship. The repairs under warranty may only be 
carried out by an authorized service centre. When making a claim under the warranty, the original 
purchase receipt (with purchase date) must be submitted. 

 

The warranty will not apply in cases of: 

 

-

 Normal wear and tear 

-

 Incorrect use, e.g. overloading of the appliance, use of non-approved accessories 

-

 Use of force, damage caused by external influences 

-

 Damage caused by non-observance of the user manual, e.g. connection to an unsuitable mains supply or 

non-compliance with the installation instructions 

-

 Partially or completely dismantled appliances 

 
 
 
 

Summary of Contents for SMAWHTOW2000WBHN2116













Reviews: